#GARBAGE DISPOSAL RESET BUTTON PROFESSIONAL#

Other people will be more squeamish or safety conscious and will not like that idea. Some people will be happy to feel around on the bottom of the unit until they can find the button. If you can’t see it, you can still find it and push it. This problem may be further compounded by it being relatively low to the ground. However, it can also be hidden away on the very bottom of the unit where you cannot see it. If you are lucky, it may be on the front bottom edge and clearly visible when you open the cabinet door. Some of those positions are more readily visible than others. Or maybe you simply couldn’t find the reset button and got no further than that before trying to look up an answer.Īlthough the reset button is typically on the bottom of the disposal, it can be in various places. In fact, if you are googling this question on the internet, you may have already tried all of the above with no success to show for it. Voila! Problem solved! Your disposal should now be working properly again.īut what if that doesn’t fix it? Life often doesn’t go as smoothly as we expected it to go. Always follow this rule, even if you are just pushing the reset button. Safety Tip: No matter how small the job, if you are doing any kind of maintenance on potentially dangerous equipment, always turn it off at the power source. Afterwards, wait a few seconds, then turn on the cold water and then turn on the disposal. If you are familiar with your garbage disposal, it should be simple enough to turn the unit off and just push the reset button. It’s a safety feature that helps protect the disposal from overheating and ruining the motor when something bad happens. The reset button popping out is similar to a local fuse being tripped. If something happens to cause a temporary jam or other problem, it will pop out. It is usually red, and it is usually located on the bottom of the disposal. Don't be afraid to contact a plumber or the manufacturer of your garbage disposal if resetting it doesn't work.Most garbage disposals have a reset button. Resetting your circuit breaker may also be necessary if the garbage disposal has overheated. This usually happens when the disposal is jammed or has overheated.įollow basic safety measures: make sure the power is off, and never stick your hand down the disposal. Resetting your garbage disposal is necessary when the overload protector, usually a small red button found on the bottom of your disposal, is sticking out.

#GARBAGE DISPOSAL RESET BUTTON PROFESSIONAL#

'If it doesn't pop back in, or it keeps resetting, you likely need a replacement or a professional to fix it,' Devlin said. If the overload protector still won't go back in, you probably have another issue on your hands. If it now stays flush when you press it, you can continue the reset process at step five. Flip it back to its original setting, then check the overload protector again. Open it and find the switch that powers your garbage disposal – it will be facing the opposite way as all the other switches.

To reset the circuit, locate the electrical panel in your home: it's usually a gray, metal box with a latched door. If your garbage disposal has overheated, the circuit that powers it may have turned itself off to prevent damage. So you've tried pushing the overload protector twice, and it still won't stay in. There's no shame in giving them a call at any point in the process. A plumber or the manufacturer of your garbage disposal can help identify your problem and advise you on the best steps to take. Remember: If at any point you feel overwhelmed, it's best to bring in an expert.

Turn the garbage disposal back on with the wall switch or plug it back in underneath the sink. Once the overload protector is flush, turn on cold water so that it gets down into the garbage disposal. If the button has popped back out, repeat steps three and four one more time. If it is now flush, it's been successfully reset. Wait 10 minutes before proceeding: this will give your disposal an opportunity to cool down if it has overheated.

Gently push the overload protector back in.

If it's sticking out about a quarter of an inch, that means it's time to reset.

Find and examine the overload protector.

Flip the wall switch to 'off' or locate where the unit is plugged in underneath the sink and unplug it. According to Devlin, certain waste materials should never see the inside of your disposal, such as paint, grease, coffee grounds, bones, potato peels, pits, and eggshells. Quick tip: Don't just toss all your trash down the drain and hope for the best.

The button will pop out about a quarter of an inch, prompting you to reset it. When your disposal is experiencing motor issues, it will automatically trip the overload protector to prevent the machine from burning out. When things are running normally, the button will be flush to the machine, or flat.

Garbage disposal reset button